Seguidor horizontal de un solo eje SMD
加载中...

Seguidor horizontal de un solo eje SMD

  • :

    Q235 or Q355 ≤50m/s, Per Local Codes 2.4KN/M^2, Per Local Codes ≥ 30 Years 15 Years
Pregunte ahora
Detalle del producto
una consulta gratis

Si está interesado en nuestros productos y desea conocer más detalles, deje un mensaje aquí, le responderemos lo antes posible.

Productos relacionados
Ajustar el fabricante de la estructura del panel solar de tierra
Ajustar la estructura del panel solar de tierra

Descripción general La estructura del panel solar de ajuste de tierra está diseñada para aumentar la generación de energía mediante ajustes de ángulo según el cambio de estación. Puede lograr una cobertura de diferentes ángulos N-S 10'-60 a través de un motor manual o eléctrico. El acero al carbono se adopta como el material principal de la estructura para garantizar toda la estabilidad.

Ballast Support for Flat Surface

Quick and easy assembly of the photovoltaic panels by means of snap-fitted universal clamps with channelled profile embedded in the ballast. Proprietary material formula: resistant to aging, moisture, heat, and corrosion at extrem weather, ensuring long-term durability. Versatility of each block for mounting the modules in both horizontal and vertical orientation.

MAG 60W Foldable Solar Charger ( Stitched Version )

60W Portable Solar Panel for Power Station, 20.8V Foldable Solar Charger with DC5521 Cable & USB/Type-C port Outputs, 23% High Efficiency IP65 Waterproof 2 Kickstands for Outdoor Camping RV Trip.

Tilted photovoltaic bracket system

HUGE inclined photovoltaic bracket system is suitable for flat terrain and various uneven slopes, with strong wind and snow resistance. System stability, large-span design, minimal installation components, and low cost. Adjustable angles from east, west, north, and south, suitable for various inclined terrain. By using a pile driver to drive the foundation into the ground, construction is simple and installation efficiency is high.

Sistema de montaje solar de tierra de acero galvanizado en caliente
Sistema de montaje solar de tierra de acero galvanizado en caliente

El sistema de montaje solar de tierra de acero galvanizado en caliente se aplica principalmente a la estación de energía fotovoltaica de tierra y la estación de energía fotovoltaica de techo plano de hormigón. El sistema tiene características de gran capacidad ajustable, enorme resistencia estructural y costos económicos para cumplir con los requisitos de los clientes.

Ballast PV System-2

Ballast PV System are applied to various kinds of flat roof projects. Main components made of hot-dip galvanized steel have good performance of structure strength, stability and anti-corrosion, and are compatible with varied solar modules. Patented structure design guarantees shorter installation time to save construction cost.

MAG 400W Foldable Solar Charger ( Integrated Structural Design )

400W Portable Solar Panel for Power Station, 36V Foldable Solar Charger with Mc4/Anderson/XT60 Cable Outputs, 23% High Efficiency IP65 Waterproof 2 Kickstands for Outdoor Camping RV Trip.

MAG Portable Power Station 600W

MAG Portable Power Station 600W takes only 2 hours to recharge 80% battery of the power station through the wall outlet and 60W PD USB-C port simultaneously. You can also recharge your power station with an AC adapator when at home, through the car outlet during a road trip or simply use MAG Portable Power Station 600W

Deja un mensaje

Deja un mensaje

    Si está interesado en nuestros productos y desea conocer más detalles, deje un mensaje aquí, le responderemos lo antes posible.

Hogar

Productos

sobre nosotros

contacto

parte superior